CyberMap - A kickrom mapper for phase 5 products
            ==================================================

CyberMap  is  a  tool  to copy a kickimage or the romimage to a ram shadow.
This  speeds  up  Rom  operation  and  increases general throughput of your
system.

Use CPROM argument to copy the built-in roms to ram shadow.  Give a filename
to load kickimage.  See examples below.

Requierments:
-------------

  A3000:          o CyberStorm MK2
  		  o raw 512 kB KickRomImage ($f80000 Image) for A4000
  		    (needs "A3000 bonus" resident)

  A4000:	  o Commodore 040, CyberStorm MK1
		  o >1 MB FastRam on your A4000 Mainboard (!)
		    (Caution: Check RAM size jumper on mainboard !)
  		  o raw 512 kB KickRomImage ($f80000 Image) for A4000
  		    (needs "A4000 magic" resident)
		  o Good luck ... :-)  it will work or not !

  A2000:          o Blizzard 2060
                  o >4 MB FastRam on Blizzard 2060
                  o Enabled MAPROM Jumper  ( see manual )
                  o raw 512 kB KickRomImage ($f80000 Image) for A2000
                    (anything > Kick 2.04 will do the job)

  General:	  o SetPatch & 680x0.libary MUST NOT be loaded !!!!!
                  o Do not use Rekick or MMUmagic Kickimages. It will not work.
                  o built-in Kickstart release 2.04 or higher.

Usage:
------

 Add the following line to the start of your startup-sequence

  <cybmap-path>/CyberMap  <options> <filename|CPROM>

 Example:

   > CyberMap MK2 CPROM			; Copy built-in rom
					; to CyberStorm MK2 Shadow

   > CyberMap MR devs:kickstart		; Load kickimage to shadow
   					; to CyberStorm MK1 & A3640 shadow


Options:
--------

   F=FORCE/S:	    o  Use the FORCE Keyword to load the image with
		       a) either the same or newer ROM Images as the image
			  currently loaded
     		       b) or if the image CRC is wrong.

   MR=MROM/S:       o  Set this , if used on CyberStorm MK1 or A3640
   B2=B2060/S:	    o  Set this , if used on B2060
   MK2/S:           o  Set this , if used on CyberStorm MK2

   CPROM=COPYROM/S  o  Copy current rom to shadow.
   FILE             o  Filename and path of Kickstart image.

   RF=RESETFMEM/S   o  Force using Resetcode in ChipMem
   RC=RESETCMEM/S   o  Force using Resetcode in FastMem

   V=VERBOSE/S	    o  Output diagnostics (Use only for debugging)


ToDo:
-----
		  o  Add support for A12x0 Blizzard cards

 Bugs:
-------
		o Sometimes RESET code does not work ! Reset with three
		  finger salute. Try RC or RF argument.




                        Carsten 'BodyLove' Schlote
                       schlote@stud.uni-frankfurt.de
                             cs@supp.phase5.de

-------------------------------------------------------------------------------
-------------------------------------------------------------------------------

History:

39.1	First release
39.2	Added checksum check, improved error reporting
39.3	Fixed small bug in SysBase Call  :-/ Forgot to
	load Exebase to A6.
39.4	--internal--
39.5	Added Blizzard 2060 support code.
39.6    -- forced bump -- no changes
39.7	Reworked RESET code... some A4000 are unable to do the magic... maybe this helps
39.11	Added MK2 support, selectable resetcode
39.12 	Added drive Inhibit(), some cleanup